Search guides

Fix a screen door that will not close

We'll rule out binding and hinge issues, then isolate the cause—weak or broken closer spring, misalignment, or warped frame—and fix it or tell you when to call a pro.

Troubleshooting · Home maintenance
15–30 min
What you'll need
  • Screwdriver (Phillips and flathead)
  • Replacement closer spring (if the spring is broken)
  • Paint scraper or 120-grit sandpaper (if paint buildup or swelling)
Step 1 of 7

Quick triage — pick your path

Get started

Choose the option that matches what you see. You can jump straight to that section.

Show full guide

Steps

Goal: Confirm the symptom, then rule out binding and hinge issues before isolating the closer spring or frame problems.

  • Release the door from the open position. Note whether it pulls shut or stays open.
  • Good: The door stays open or drifts open—proceed to Check the closer spring.
  • Bad: The door closes smoothly—no problem. If the door sticks when opening or closing, that is a different problem—see Fix a door that sticks.

Check the closer spring

Goal: Fix a weak or broken closer spring so the door pulls shut when released.

  • Look at the closer spring—a rod with a spring inside, usually along the top or bottom of the door. Check for adjustment holes or a tension screw.
  • If the spring is weak: move it to a hole farther from the hinge, or turn the tension screw clockwise to increase closing force.
  • If the spring is broken or bent: remove it and take it to a hardware store for a match. Install the replacement and adjust tension.
  • Good: The door pulls shut when released—done.
  • Bad: The spring is adjusted or replaced but the door still will not close—proceed to Check hinges and binding.

Check hinges and binding

Goal: Fix loose hinges and binding so the door can close freely.

  • Lift the door by the handle. If it moves up and down, the hinges are loose. Tighten all hinge screws with a screwdriver—use the longest screws that fit.
  • Open and close the door by hand. Note where it catches. If binding is the cause—paint buildup or swollen frame—scrape or sand the high spots. If the door or frame is warped, do not sand—call a carpenter.
  • Good: The door clears the frame and closes smoothly—done.
  • Bad: Warped or fixes did not help—call a carpenter or handyman.

When to get help

Call a carpenter or handyman if:

  • The door or frame is warped.
  • The spring mechanism is damaged and replacement did not work.
  • You have tried adjusting the spring, tightening hinges, and removing paint and it still will not close.

Do not force a binding door—it can damage the frame or hinges. For related fixes, see Fix a door that sticks or Fix a door that will not latch.

Verification

  • The door pulls shut when released from the open position.
  • The door stays closed without drifting open.
  • Hinge screws are tight and the door does not shift when you lift it.
  • No binding at the top, bottom, or latch side when closing.

Escalation ladder

Work from the device outward. Stop when the problem is fixed.

  1. Confirm symptom Note whether the door stays open or drifts open when released.
  2. Closer spring — adjust or replace Increase tension or replace the spring if weak or broken.
  3. Hinges Tighten loose hinge screws so the door does not sag.
  4. Binding — paint or swelling Remove paint buildup or sand swollen spots.
  5. Call a pro Warped door or frame, damaged spring mechanism, or repeated failures—call a carpenter or handyman.

What to capture if you need help

Before calling support or posting for help, have these ready. It speeds everything up.

  • Whether the door binds at a certain point or never pulls
  • Closer spring type (rod-style, torsion, etc.)
  • Whether hinges are loose or the door sags
  • Whether paint buildup or swelling is visible
  • Steps already tried

Does the door stay open or drift open when released?

Release the door from the open position. If it stays open or drifts open instead of pulling shut, the closer spring is weak or the door is binding.

Release the door. Yes: It stays open or drifts—proceed to check the closer spring. No: If the door closes smoothly, you are done. If the door sticks when opening or closing, that is a different problem—see Fix a door that sticks.

Yes No

You can change your answer later.

Is the closer spring weak or broken?

Most screen doors use a rod-style spring. Check for adjustment holes or a tension screw. A weak spring will not pull the door shut.

Look at the closer spring. Weak or broken: Adjust tension (move to different hole or turn screw) or replace the spring. Good: Spring is strong—proceed to check hinges and binding.

Yes No

You can change your answer later.

Adjust or replace the closer spring

Adjust tension: move the spring to a hole farther from the hinge, or turn the tension screw clockwise. If the spring is broken or bent, replace it with a matching part from a hardware store. Test. Good: Door closes—done. Bad: Still will not close—check hinges and binding.

Done

Are the hinges loose or is the door binding?

Lift the door by the handle. If it moves up and down, hinges are loose. Check where the door catches when closing.

Lift the door. Check for binding along the edge. Loose or binding: Tighten hinge screws; remove paint buildup or sand swollen spots. Warped: Do not sand—call a carpenter. Good: Door closes—done. Bad: Still will not close—call a pro.

Yes No (warped)

You can change your answer later.

Tighten hinges and remove binding

Tighten all hinge screws. Remove paint buildup or sand swollen spots. Test. If the door closes smoothly, you are done. If it still will not close, call a carpenter or handyman.

Done

No action needed or different problem

If the door closes smoothly when released, you are done. If the door sticks when opening or closing, that is a different problem—see Fix a door that sticks.

Done

Call a carpenter or handyman

Call a carpenter or handyman if: the door or frame is warped; the spring mechanism is damaged and replacement did not work; or you have tried adjusting the spring, tightening hinges, and removing paint and it still will not close. Do not force a binding door—it can damage the frame or hinges.

Done

Reviewed by Blackbox Atlas

Frequently asked questions

Why would a screen door not close on its own?
Common causes: a weak or broken closer spring, loose hinges (door sags and binds), paint buildup or swollen frame (door sticks), or a warped door or frame. The closer spring is the most common fix—adjust tension or replace the spring.
Can I fix a screen door that will not close myself?
Yes. Most screen doors use a rod-style closer spring. You can adjust the tension by moving the spring to a different hole, or replace the spring assembly from a hardware store. Tightening hinges and removing paint buildup often fixes binding.
When should I call a pro for a screen door that will not close?
Call a carpenter or handyman if the door or frame is warped, the spring mechanism is damaged and replacement did not work, or you have tried adjusting the spring, tightening hinges, and removing paint and it still will not close.

Rate this guide

Was this helpful?

Continue to